How to Undercoat Your Space Wolves Venerable Dreadnought Sprue

This is a tutorial on how to undercoat Space Wolves Venerable Dreadnought sprues with primer paint.

** When using spray cans please remember to do this in a well ventilated area and free from floating dust. **

Materials and Supplies Needed:
  • Army Painter Space Wolves Grey Spray Paint
  • Piece of Cardboard
  • Space Wolves Venerable Dreadnought box


Primer Paint Process:

Step 1: Setup a piece of cardboard in a well ventilated area where you can place your sprues for painting.

Step 2: Shake the spray can for a few minutes to mix the paint.

Step 3: Test the paint can by spraying some card board on the side to make sure it does not splatter.

Step 4: Start by painting your spruces from the front side and wait a minute or two for them to dry.

Step 5: Once the paint is dry rotate your spruces so you can paint the back side.

Step 6: Wait about 15 minutes and flip the spruces over so you can paint the under side from the front.

Step 7: Wait another 2-5 minutes till the paint is dry and rotate your spruces and do a final coat of the back side.

Step 8: Let the sprues sit in a dry warm place for at least an hour or two before cutting into your spruces for assembly.


Video of The Process:

Link to Share


No Comments Yet!

You can be first to comment this post!